Different Models of Rubber-Coated Magnets Have Different Effects

A rubber-coated magnet measuring 43mm x 6mm

This rubber-coated neodymium installation magnet measures 43mm (depth) x 6mm (height). It has a center hole with an M6 internal thread. The rubber coating protects surfaces. This rare earth magnet has a pulling force of 9 kg and weighs 36 grams.

These rubber magnets are typically used to create fixed points. In construction sites, this includes fixed points for safety barriers and windbreak screens. When connected to metal door and window frames, these fixed points are used to secure and protect buildings under construction.

The fixed points in containers, portable homes, mobile homes, and RVs are safe, sensitive to delicate surfaces, and do not penetrate walls, ceilings, or floors.

The coating on rubber-coated magnets protects sensitive surfaces such as glass and plastic panels. To connect to these surfaces, magnets need to be installed on both sides of the panel for fastening. For truck drivers, campers, and emergency service personnel, these devices provide a secure fixed point for temporary shelter lines, signs, and flashing lights.

A rubber-coated magnet measuring 66mm x 8mm

This rubber-coated installation magnet measures 66mm (depth) x 8mm (height). It has a center hole with an M6 internal thread. The rubber coating protects surfaces. This rare earth magnet has a pulling force of 14 kg and weighs 110 grams.

Due to the increased friction generated between rubber and steel surfaces, rubber-coated magnets have better sliding resistance than regular magnets. The rubber coating is corrosion-resistant and protects easily scratched surfaces.

Compared to non-rubber-coated magnets, these rubberized magnets are very sturdy and have high tolerance for metal impact and water penetration. The outer threads outside the screws can be adjusted if necessary. These high-strength rare earth magnets are designed for use with washers and nuts. They are mounted in a steel can and covered with a durable rubber shell, which provides extra protection for fragile surface areas.

A rubber-coated magnet measuring 88mm x 8mm

This neodymium installation magnet measures 88mm (depth) x 8.3mm (height). It has a center fixing with an M6 internal thread. The rubber coating protects surfaces. This rare earth magnet has a pulling force of 42 kg and weighs 210 grams.

Our rare earth installation magnets are designed to twist objects in. These neodymium installation magnets are high-strength rare earth magnets coated with durable rubber to prevent damage to fragile surface areas. These magnets are often used as anchors.

A portion of the plywood is twisted into the centre thread of the magnet, closing gaps in doors or windows. During this time, opening and closing gaps can only be done from the inside of the site using a screwdriver. The rubber coating on this very strong neodymium channel magnet can protect the frame. While this method is safe, reliable, and easy to open or close, it allows for the installation of fragile glass products after all dirty and destructive construction work is completed.